This is to be performed by an Administrator 

NOTE: If you are required to perform this on a terminal server such as RDSHDC01 or RDSHDC02 disable any new connections to the terminal server and then make sure all users log off the terminal server before installing. 

Issue:

Install or re-install Solomon.

Solution:

Step 1. Launch run a Command Prompt as an administrator

Step 2. Mount S: with command

net use s: \\debcobag.com\dfs\solomon-programs

Step 3: Navigate and run setup.exe from s:\solomon\wrkstn\

The install is simple, keep clicking next until in begins the install.

Setup will then hang for 5-10 min (see figure 1) then complete.

Figure 1